Renogy Rover 30 Amp 12V/24V MPPT Common Positive Solar Charge Controller Battery Regulator Compatible with Lithium Sealed, Gel, Flooded Batteries and Bluetooth Module


Get The Best Deal
See Special Price
$90.26
 
BUY FROM AMAZON

The Renogy 30A Rover PG MPPT Charge Controller is an intelligent positive ground controller.

Built with protections against reverse polarity, short-circuiting, overheating, and more, this MPPT controller is also capable of self-diagnosing itself in the event of an error.

Its durable shell protects against general wear and tear, and aluminum heat sink allows for heat dissipation. The Rover 30A PG can automatically detect 12V/24V systems and can handle various battery options such as GEL and Lithium.

Pair this charge controller with the Renogy BT-1 and Renogy BT app to view your system’s performance in real time and make parameter changes straight from your smart device.

  • Compatible with 12V and 24V systems. Also compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium (12.8V LFP).
  • Positive Ground controller featuring innovative MPPT (maximum power point tracking) technology with high tracking efficiency up to 99%, maximizing the energy from solar panels to charge your system. 4-stage charging (Bulk, Boost, Float, and Equalization) and temperature compensation increase your battery life and improve your system’s performance.
  • Intelligent protection built-in against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current.
  • LCD screen and multiple LED indicators for displaying system operation information, customizable parameters, and error codes. Aluminum heat sink allows for efficient heat dissipation.
  • RS232 port allows the Rover PG to communicate with the BT-1 Bluetooth module, which can pair with the Renogy BT smartphone app. You may also connect the included USB converter cable from the port to a PC to use the Solar Monitoring Software.

Solar Charge Controller

Renogy Rover PG

20A/30A/40A MPPT Solar Charge Controller w/ LCD Display

The Renogy 20A/30A/40A Rover PG MPPT Charge Controller is an intelligent positive ground controller. Built with protections against reverse polarity, short-circuiting, overheating, and more, this MPPT controller is also capable of self-diagnosing itself in the event of an error.

It can automatically detect 12V/24V systems. Pair this charge controller with the Renogy BT-1 and Renogy BT app to view your system’s performance in real time and make parameter changes straight from your smart device.

Solar Charge Controller

MPPT technology

Automatically detect 12V or 24V DC system voltages

Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%

Solar Charge Controller

Various optional batteries

Deep cycle Sealed, Gel, Flooded and Lithium (12.8V LFP) battery option ready

Charges over-discharged lithium batteries

Solar Charge Controller

Protection System

Electronic protection: Overcharging, over-discharging, overload, and short circuit.

Reverse protection: Any combination of solar module and battery, without causing damage to any component

Solar Charge Controller

Customize charge controller

Customizable charging voltages

Positive ground charge controller

.

.

.

.

RECOMMENDED READING

Trying To Save The Environment? Follow These Green Energy Tips

Nowadays, it is common for people to want to use green energy. The problem is, many people do not usually know what this entails. However, you do not have to worry about it. In the following article, you are going to be provided with advice that will have you becoming a green energy expert in no time!

You can conserve energy by shading your windows from sunlight. Shades or curtains can also help. When you do these things, you then make your house cooler and reduce the amount of air conditioning you use during the summer. In addition to conserving energy, you will be able to save money.

When building your home, pay attention to its orientation. An ideal home should be protected against overhead sun during the summer and be oriented so that it gets low-angle sun in the winter. This is a good way to save money on your heating bill and will keep your home cool in the summer.

There are government grants available for investing in renewable energy. Ask at your local municipality office to research what types of programs might be available to you. You may qualify for wind or solar installation with little cost, or possibly you may be able to use it as deduction on your taxes.

Try heating your home with a wood pellet stove. The pellets burned in a pellet stove are made of highly compact sawdust. They burn so cleanly than they are not required to get an EPA certification for emissions. Be aware, however, that the cost of the pellets may be high in some areas.

Take the time to dry your clothes naturally. The dryer in your home takes up a lot of energy and it is quite simple to just hang your clothes and allow them to air dry. If you do need to use the dryer, then be sure to clean out the lint to help it work more efficiently.

A very easy and cheap way to save on your high energy bills is to try installing some low flow shower heads and faucets. Switching from the standard, 2.5 gallon/minute shower heads, to the low flow 1.5 gallon/minute ones, can help you save a lot with your hot water energy costs.

Start using batteries that have been recycled or else use rechargeable batteries. Disposable batteries are full of toxins and actually take about half of the energy they put off, in order to produce. If you are using disposable batteries, be sure to recycle them. Rechargeable batteries, however, can be used over and over again.

You do not have to leave your electronics behind to live a green lifestyle. Recharge your electronics with solar chargers and you no longer have to be concerned with your electronics being a drain on the environment. It is a small investment that pays off quickly in electric bills and a guilt-free conscience.

To help you increase your clean-energy consumption, try using wind energy. Wind is a very clean type of alternative energy, and it can help you cut your electricity bill a ton. If this solution interests you, check with your local authority to ensure you have proper zoning and also ensure you have sufficient space.

Use Energy Star rated appliances instead of your old appliances. Energy Star appliances are guaranteed to use less energy than those made previously. The rating promises refrigerators and freezers will use 20 percent less energy, 40 percent less for dishwashers and 50 percent less energy for washing machines.

A good, old common sense tip for saving energy is turning off the lights as you leave the room. Turning off the lights will save a surprising amount of energy. Your power bills will also be significantly less.

Try installing a toilet that saves water. Estimates show that 50% of water used in a home is to flush the toilet. Five gallons is the typical amount used by older models, while low-flow toilets consume about 1.6 gallons per flush.

If at all possible, consider switching your electric or oil heating to gas. This is both better for the environment and your pockets. Just be aware that this is can be a complicated job that should be taken on by a skilled expert, should you decide to make this switch.

Stay in control of your energy consumption by getting a Bye Bye Standby device. This device is basically a motherboard into which you can plug in all your devices. You will be able to completely turn on and off any device that you are not using through this panel. It also gives you access to information about your power consumption.

Many homeowners overlook wasted energy in the garage when they are trying to conserve. Heat in an uninsulated garage can literally go out the windows and doors. If you are interested in green energy, start by making sure your garage is properly insulated. Be sure to check with your county about building codes before you start.

When purchasing wood items, consider getting products that are crafted from bamboo. Bamboo is a strong and durable option for flooring, cutting boards and furniture. Bamboo is becoming very popular and growing to be made for cutting boards for hard wood floors. This saves energy on the recycling and production end of manufacturing products.

Keep your fridge and freezer closed as often as possible. Refrigeration consumes about a third of your households total energy and constantly leaving your fridge and freezer open can increase the energy needed by up to 25%. Make sure that you know what you want before opening up your refrigerator.

Make sure your dishwasher, washing machine, and clothes dryer are full (but not overfilled) prior to using them. This saves a lot of water and detergent with each load of wash. Also check the settings on these machines. If you have a small load, make sure the setting for small loads is being used.

As stated in the beginning of the article, many people have begun to look into the use of green energy. With the proper knowledge, such as what you have read in this article, you will not only be saving energy, but you will be saving money in no time at all!